← Spannero Workshop

Engineering & Maintenance

Motor Won't Start? Don't Immediately Blame the Motor

Spannero motor troubleshooting infographic showing an industrial electric motor, start-stop controls and a five-point fault-finding checklist.

⚡ **MOTOR WON'T START? DON'T IMMEDIATELY BLAME THE MOTOR!**

You press START.

Nothing happens.

The motor isn't turning, production is waiting, and somebody has already decided the motor must be faulty.

But is it?

**A motor not running doesn't necessarily mean there's anything wrong with the motor itself.**

Before reaching for the spanners, work through the evidence.

🔧 **FIVE THINGS TO INVESTIGATE**

**1️⃣ IS THE CORRECT POWER SUPPLY AVAILABLE?**

A missing supply, blown fuse, phase loss or incorrect voltage can prevent a motor from starting.

Remember: power arriving at the control panel doesn't necessarily mean it's reaching the motor.

**2️⃣ IS THERE A TRIP, ALARM OR MISSING PERMISSIVE?**

Check the HMI, motor protection and drive fault history.

A missing run permissive may prevent the machine from issuing a start command.

**3️⃣ IS THE SAFETY SYSTEM PREVENTING START?**

An open guard, activated emergency stop or safety-related fault may intentionally prevent operation.

Don't bypass it. Find out why the system isn't allowing the start.

**4️⃣ IS THE STARTER OR DRIVE RECEIVING A VALID RUN COMMAND?**

A start button being pressed doesn't prove the motor starter has actually received a run command.

Check the sequence between the operator request, PLC logic, permissives and output device.

**5️⃣ IS THERE AN OVERLOAD OR MECHANICAL PROBLEM?**

A seized bearing, jammed gearbox or overloaded conveyor can prevent a healthy motor from starting.

An overload trip is evidence of a problem — not proof that the motor has failed.

🔍 **WORKSHOP TIP**

Identify the last part of the start sequence that worked and the first part that didn't.

That gives you a much better starting point than randomly changing components.

And if there's a fault code, record it before performing an authorised reset.

⚠️ Electrical testing and intrusive inspection must follow the site's safe working procedures and be carried out by competent, authorised personnel.

**The motor is only one part of the system. Diagnose the complete starting chain.**

💬 **What's the strangest reason you've encountered for a motor refusing to start?**

**spannero | For people who like to know how things work.**

More on this

## Why Won't an Electric Motor Start?

When an industrial electric motor refuses to start, the motor itself is only one possible cause.

A typical motor starting system involves several stages:

**START REQUEST → PERMISSION → START COMMAND → POWER OUTPUT → MOTOR MOVEMENT**

If any stage fails, the motor may remain stationary.

The most effective approach is to establish what should happen, observe what actually happens and identify where those two differ.

## 1. Is the Correct Electrical Supply Available?

Before suspecting a motor fault, establish whether the required supply is available.

Depending on the installation, possible problems include:

- An open upstream isolator or protective device

- A blown fuse

- Missing supply voltage

- Single-phasing on a three-phase system

- A faulty contactor power contact

- Damaged or disconnected cabling

- An incorrect supply for the motor arrangement

A panel that has power isn't necessarily supplying the motor correctly.

For example, the control circuit may be energised while the motor power circuit remains disconnected.

**Practical lesson:** Follow the actual power path using the equipment drawings. Don't assume that an illuminated indicator or energised contactor coil proves healthy power at the motor.

Electrical measurements must only be made under an appropriate, authorised safe working procedure.

## 2. Is There an Alarm, Trip or Missing Permissive?

Modern machinery may prevent a motor from starting if certain operating conditions haven't been satisfied.

Examples include:

- An overload relay has tripped.

- A VFD has registered an active fault.

- A process interlock is unsatisfied.

- The machine is in the wrong operating mode.

- A required pressure, level or temperature condition is absent.

- A start delay or programmed sequence has not completed.

These conditions do not necessarily indicate a faulty motor.

The control system may be deliberately preventing operation.

**Practical lesson:** Read the HMI messages, drive status and available fault history before making changes.

A reset may clear useful evidence without addressing the underlying cause.

## 3. Is the Safety System Preventing Start?

Industrial machines incorporate safety functions to prevent hazardous operation.

Depending on the design, these may include:

- Emergency stop circuits

- Guard interlocks

- Safety relays

- Safety PLCs

- Safe Torque Off functions on suitable drives

If a safety function is active, the machinery may intentionally prevent motor torque or starting.

This is not something to defeat to get production running.

**Practical lesson:** Establish the safety state using approved indicators and diagnostic information.

If the system is preventing operation, determine why and follow the manufacturer's approved recovery procedure.

Never bridge safety contacts or bypass protective devices as a troubleshooting shortcut.

## 4. Is the Starter or VFD Receiving a Valid Run Command?

A motor starting command often passes through several devices before power is delivered to the motor.

For example, a simplified PLC-controlled contactor system might operate like this:

**Operator presses START**

↓

**PLC receives the request**

↓

**Required operating conditions are satisfied**

↓

**PLC commands the contactor**

↓

**Contactor closes its power contacts**

↓

**Motor receives power and accelerates**

A problem at any stage may interrupt the sequence.

For a VFD-controlled motor, additional conditions may include drive readiness, an active speed reference, enable signals and internal drive protection.

A drive displaying RUN does not automatically prove that the motor is rotating.

Similarly, hearing a contactor click doesn't prove all its main contacts are healthy.

**Practical lesson:** Compare the commanded state with the actual feedback. Determine whether the problem occurs before or after the motor power output stage.

## 5. Could the Mechanical Load Be Preventing Starting?

Not every apparent electrical fault has an electrical root cause.

A healthy motor may fail to accelerate because the driven equipment is obstructed or overloaded.

Possible causes include:

- Seized gearbox bearings

- Jammed conveyor mechanisms

- Mechanical damage or excessive friction

- A brake that hasn't released

- A blocked pump

- An excessive process load

- A damaged coupling or transmission component

Depending on the installation, the motor may trip during starting, hum without accelerating or fail to move the driven equipment.

**Practical lesson:** Consider the complete drive train, from motor shaft to the actual load.

Where mechanical checks are required, follow isolation procedures and account for stored mechanical energy.

Do not attempt to rotate equipment by hand until it has been made safe.

## 6. What Can the Symptoms Tell You?

### Nothing Happens When START Is Pressed

Investigate whether a genuine start request exists.

Check the operating mode, permissives, alarm state and control sequence.

Don't assume the motor has been commanded to start.

### The Contactor Clicks, but the Motor Doesn't Turn

The contactor may be operating without delivering a healthy three-phase supply.

Other possibilities include motor protection, circuit faults or a mechanical problem.

The click alone does not prove the electrical power path.

### The Motor Hums but Doesn't Accelerate

Possible causes include phase loss, inadequate voltage, incorrect connections, excessive mechanical load or a motor fault.

Avoid repeated start attempts that could cause overheating.

### The Motor Trips Immediately

Record which protective device trips and under what conditions.

A protective trip may indicate overcurrent, a short circuit, an earth fault, an unsuitable setting or another detected condition.

The trip itself doesn't establish which component is responsible.

### The VFD Reports RUN, but Nothing Moves

Check the commanded speed, actual output frequency, drive status and available feedback.

A zero-speed command may explain the lack of movement.

Alternatively, the drive may be reporting an operating state while another

Keep exploring the workshop

Practical references and original designs for people who like to know how things work.

The Field Reference More workshop posts